How do I maintain my Wooden Floors and make them longer lasting?
MM Parquet & Carpentry would like to go through a few details on the best way of maintaining your solid parquet flooring or your engineered parquet flooring.
Proper maintenance of both solid and engineered parquet flooring is essential to keep them looking beautiful and prolong their lifespan. Here are some of our best practices for maintaining our parquet flooring
It’s essential to identify the correct products for maintaining your parquet flooring, depending on the type of finish—be it polish lacquer or a wax oil finish .
Here’s a breakdown of suitable products for each type, along with application tips:
Polished Lacquered Parquet Floors
Bona Refresher is a pH-neutral cleaner specifically designed for polished lacquered floors and helps maintain the shine without damaging the finish.
With Bona water-based hardwood floor polish is designed for sealed finishes. This helps enhance the shine and protect the surface. Vacuum or sweep the floor thoroughly using a soft flat mop, apply the polish in thin, even coats, allowing it to dry completely before walking on the floor.
Wax-Oiled Parquet Floors
Bona Oil Refresher is a high-quality product that is compatible with existing wax oiled finishes.This refresher is formulated specifically for wax oiled floors to ensure safe cleaning without stripping the wax oil. Clean the floor using a lightly damp flat mop to remove dirt and old marks
How to use
Apply the oil refresher using a soft cloth or flat mop. Spread evenly with a soft pad or cloth once it dries.
Periodically, apply a maintenance oil compatible with the original finish to nourish the wood and restore its lustre. Use the Bona oil refresher to remove dirt and dust, following the manufacturer’s guidelines
Always check product labels for compatibility with your existing finishes. Establish a regular maintenance routine based on the type of finish used to sustain the appearance and longevity of your parquet floors.
By providing the right products and careful maintenance, your parquet floors, fitted by MM Parquet and Carpentry will uphold their beauty and durability for years to come. If you require specific product recommendations or assistance with sourcing, please reach out!
Regular Cleaning
Regularly sweep or vacuum the floor to remove dirt and debris. Use a soft-bristle broom or a vacuum with a hardwood floor attachment to avoid scratches.Damp Mopping Use a damp mop with a mild Bona refresher for oil or lacquer finish . Avoid excessive water as it can damage the wood over long periods of time
Protective Measures:
- Furniture Pads , is a must and place felt pads under furniture legs to prevent scratching.
- Rugs and Mats are recommended in high-traffic areas to protect the flooring from wear and tear. Make sure the rugs have a non-slip backing.
Solid Parquet Flooring Refinishing
Solid parquet can be sanded and refinished multiple times. Depending on the wear, consider refinishing every 5 to 10 years. Maintain indoor humidity levels between 30% and 50% to prevent the wood from expanding or contracting, which can lead to gaps or warping. Avoiding Direct sunlight , using curtains or blinds to reduce direct sunlight exposure to minimize fading.
Engineered Parquet Flooring
Since engineered wood is more moisture-resistant than solid wood but still prone to damage from excess moisture, avoid soaking it or using steam cleaners to often.
Use cleaners specifically designed for engineered wood floors to prevent damage to the finish , which again would be the same prose as the #bona refresher or oil refresher.
Repairing Scratches in your Wood Floors
For scratches or minor damage, consider using a touch-up kit or repair wax. If the damage is extensive, consult a with MM Parquet & Carpentry for repairs and damage to be corrected
Clean spills immediately to prevent staining or moisture damage to any parquet for cleaning or significant maintenance tasks it is very important to contact MM Parquet for the correct way to maintain parquet flooring , as over use or lack of correct maintenance can lead to damage especially with high end parquet flooring like solid brass and inlay borders and mosaic parquet flooring
These particular lines of maintenance should be done minimum once every year or two at most
Following these guidelines will help ensure that both solid and engineered parquet flooring remain in excellent condition over time at MM Parquet & Carpentry If further assistance is required, feel free to reach out!
